🎨 Tile Renewal Spray – 100ml Surface Refresh Paint, 3 Colors
🎨 Tile Renewal Spray – 100ml Surface Refresh Paint, 3 Colors
Couldn't load pickup availability
🎨 Tile Renewal Spray – 100ml Surface Refresh Paint, 3 Colors
Give Compatible Tile Surfaces A Fresh New Finish
A compact 100ml spray coating designed for cosmetic colour updates on properly prepared compatible tile and household surfaces.
A Simple Way To Change The Look Of Selected Tile Surfaces
Instead of replacing an entire tiled area, use a colour coating to create a refreshed decorative appearance where the surface is suitable and properly prepared.
Pick The Finish You Want
Available in black, white and yellow so you can choose a colour that suits your decorating project.
Designed For Spray Application
Apply controlled, light passes rather than relying on a single heavy coat for a more even-looking finish.
Useful Around The Home
Suitable intended areas include compatible tile walls, backsplashes and selected bathroom or kitchen surfaces.
Surface Preparation Comes First
A clean, dry and properly prepared base helps the coating perform as intended and supports better adhesion.
Three Shades For Different DIY Projects
Choose from black, white or yellow to create a new decorative direction for a compatible surface. The three options make it easier to coordinate your tile refresh with the surrounding room.
Build Coverage Gradually With Spray-On Layers
Keep each pass light and consistent, allowing appropriate drying time between applications. Building the finish gradually gives you greater control over the final appearance.
Made For Selected Bathroom & Kitchen Surfaces
The coating can be considered for compatible tile walls, backsplashes, tub exteriors and sink surrounds where the surface and product label allow application.
Start With A Clean, Dry Surface
Grease, soap residue, dust and loose particles can interfere with adhesion. Thorough preparation before spraying is an important part of the application process.
Where You Can Use It
Tile Walls
Refresh compatible, properly prepared wall tile.
Backsplashes
Give selected kitchen tile a different visual finish.
Tub Exteriors
Consider for exterior areas only when permitted.
DIY Updates
Test a small hidden section before wider application.
Four Steps To Get Started
🧼 Clean The Surface
Remove grease, soap residue, dust and any loose material.
🔍 Test A Small Area
Check colour, adhesion and surface compatibility before full application.
💨 Spray Lightly
Apply controlled thin passes and avoid loading too much coating at once.
⏳ Allow Proper Curing
Follow the product label for drying and curing times before normal use.
Take A Closer Look
Explore the additional product images below for application ideas, colour references and surface details.
At A Glance
What's Included
1 × 100ml Tile Renewal Spray Paint
- Use in a well-ventilated area and keep the spray away from heat sources, sparks and open flames.
- Always test an inconspicuous section first, as adhesion and final appearance can vary depending on the tile glaze, existing coating and preparation.
- Do not apply to food-contact surfaces, continuously immersed areas or surfaces not approved by the product label.
- Allow the coating to dry and cure according to the product instructions before putting the treated surface back into normal use.
Refresh The Look. Keep The Project Simple.
Choose your colour, prepare the surface carefully and build the finish with controlled spray coats for your next compatible tile refresh project.
